Add to Cart
XQ230612 3/2 way G1/4" XQ Series China Factory Stainless Steel Roller Lever Valve
Specification
Model | Type | Port Size | Nominal dia (mm) | Operating force | Operating pressure | Fluid temperature | Ambient temperature | Service life |
XQ230410 | 3/2 | G1/8 | 4 | 26N | 0 - 1.0MPa | -10 - 60 ℃ | 5 - 60 ℃ | 10 million times |
XQ230610 | G1/4 | 6 | 35N | |||||
XQ250410 | 5/2 | G1/8 | 4 | 30N | ||||
XQ250610 | G1/4 | 6 | 40N | |||||
XQ230411 | 3/2 | G1/8 | 4 | 26N | ||||
XQ230611 | G1/4 | 6 | 35N | |||||
XQ250411 | 5/2 | G1/8 | 4 | 30N | ||||
XQ250611 | G1/4 | 6 | 40N | |||||
XQ230412 | 3/2 | G1/8 | 4 | 16N | ||||
XQ230612 | G1/4 | 6 | 24N | |||||
XQ250412 | 5/2 | G1/8 | 4 | 19N | ||||
XQ250612 | G1/4 | 6 | 27N | |||||
Model | Type | Port Size | Nominal dia (mm) | Operating force | Operating pressure | Fluid temperature | Ambient temperature | Service life |
XQ230420 | 3/2 | G1/8 | 4 | 26N | 0 - 1.0MPa | -10 - 60 ℃ | 5 - 60 ℃ | 10 million times |
XQ230620 | G1/4 | 6 | 35N | |||||
XQ250420 | 5/2 | G1/8 | 4 | 30N | ||||
XQ250620 | G1/4 | 6 | 40N | |||||
XQ230420.1 | 3/2 | G1/8 | 4 | 26N | ||||
XQ230620.1 | G1/4 | 6 | 35N |
2 Position 3,5 - Port Mechanical Valve
XQ Series
When a mechanical valve is installed, the moving direction of the ram should be in α angle against the valve and the plunger should be pressed down a S distance(the direction-changed stroke) as shown in diagram.
Mechanical valves usually use the externa force from cams or rams to change the fluid flowing directions.
When the external forces disappear the valves reset automatically. There are several control types: plunger, roller plunger, roller lever and one way roller lever, 2-Pos. 3-Port and 2-Pos. 5-Port. The P port and R port of a 2-Pos. 3-Port valve can be exchanged so as to change the valve from normally closed to normally open.
Pictures details
Delivery
1. If the products we have in store, we will send it out ASAP after payment.
2. If the products which were customized, we will complete the production within a specified period of time, and send it out the first time, we can promise it.
3. We have a variety of ways to deliver goods, usually DHL, Fedex, TNL will be normal ways, If you require use of a courier, we can do it.
4. Also we can send by your delivery acount if you want.
The installment introduction:
1. First, Confirm the pulse valve in good condition and then installed
2. To tighten the hard nut, the maximum torque of 20 N*m.Tighten the trachea, torsion of 20 N*m.
4. The connection control wire needs connect of every electric control valve seat. Pay attention to the line adown to prevent rain waterproof. Or through the joint and nylon pipe, it will connect the pulse valve and electromagnetic assembly boxes of nylon pipe connection.
5. Testing the pulse valve blowing, listening all the pilot valve whether it is normal operation and whether the pulse blowing sound is clear.