FLY AUTOMATION
Automation Industry Expert . Focused on Pneumatic Components 15 years!
Add to Cart
specification:
1.Capacity...................................:Screw Dia.2.5~4MM
2.Lock Torque.............................:4-16kg/cm
3.Free Speed..............................:1200RPM
4.Total Length.............................:230mm
5.Weight......................................:670g
6.Air Consumption.......................:0.2M³/min
7.Recomm.Air Pressure................:6kg/cm²
Instructions:
1.Torque Control,Turning for Pre Set Torque
2.Push-to-Start
3.Easy Reverse
| NO. | Description | Quantity | NO. | Description | Quantity |
| 1 | Front Housing | 1 | 23 | Valve-stem | 1 |
| 2 | Bushing | 1 | 24 | O-Ring | 1 |
| 3 | Ball Collar | 1 | 25 | Steel Ball | 1 |
| 4 | Steel Ball | 1 | 26 | O-Ring | 2 |
| 5 | Anvil | 1 | 28 | Steel Ball | 1 |
| 6 | Washer | 1 | 29 | Spring | 1 |
| 7 | Spacer | 1 | 30 | O-Ring | 1 |
| 8 | Hammer Pin | 2 | 31 | Pin | 1 |
| 9 | Hammer Dog | 2 | 32 | Reverse Knob | 1 |
| 10 | Hammer Cage | 1 | 33 | Pin | 1 |
| 11 | Hammer Cam | 1 | 34 | Switch Lever | 1 |
| 12 | Washer | 1 | 35 | Pin | 1 |
| 13 | Nut | 1 | 40 | O-Ring | 1 |
| 14 | Bearing | 1 | 41 | Air Inlet | 1 |
| 15 | Front End Plate | 1 | 42 | Hanger | 1 |
| 16 | Rotor Blade | 6 | 43 | Switch set | 1 |
| 17 | Rotor | 1 | 46 | Air Regulator | 1 |
| 18 | Cylinder | 1 | 47 | Retaining Ring | 1 |
| 19 | Pin | 1 | 48 | Washer | 2 |
| 20 | Rear End Plate | 1 | 49 | Ball Retainer | 1 |
| 21 | Bearing | 1 | 50 | Steel Ball | 1 |
| 22 | Housing | 1 | 51 | Spring | 1 |