FLY AUTOMATION
Automation Industry Expert . Focused on Pneumatic Components 15 years!
Add to Cart
Solenoid used in the remote or integral actuation of dust collector diaphragm or pilot valves.
Suitable for:
All integrally piloted FLY/AIRWOLF dust collector diaphragm valves, RCA3D series pilot valves and
pilot valve enclosures, and 3DS pilot valves.
Installation:
Slide solenoid over ferrule tube. Ensure terminals are on top. For QT and QF type
solenoids ensure nylon washer is in place. Slide clip onto pilot iron top. Ensure voltage
supplied to solenoid is within -10 % and +15 % of the solenoid rated voltage.
Operation:
Recommended on time range: 50-500 ms
Recommended time between pulses: 1 minute or greater
Approvals
• C-Tick
• EMC ( 89 / 336 / CE )
Drawing:
Construction:
| Encapsulation | PA-6 |
| C-frame | Mild steel zinc passivated |
| Bobbin | PA-6 |
| Insulation class | B/130 °C |
| Rating | Non-continuous use only |
| Clip | Mild steel ( mechanically plated ) |
Order Code and Electrical Characteristics:
| Code K- | Type | Connection Type | Class | Voltage | Inrush mA | Hold mA | Power | Colour |
| 310 | QD | Conduit ( M20 x 1.5 ) | IP31 | 200/240V 50/60Hz | 148/143 | 105/94 | 23.1 VA | Green |
| 311 | QD | Conduit ( M20 x 1.5 ) | IP31 | 100 / 120V 50 / 60Hz | 234/255 | 180/152 | 19.8 VA | Green |
| 312 | QD | Conduit ( M20 x 1.5 ) | IP31 | 24V 50/60 Hz | 1338/1096 | 963/716 | 23.1 VA | Green |
| 313 | QD | Conduit ( M20 x 1.5 ) | IP31 | 24VDC | 873 | 873 | 20 W | Green |
| 314 | QD | Conduit ( M20 x 1.5 ) | IP31 | 12VDC | 1644 | 1644 | 20 W | Green |
| 320 | QD | Conduit ( ½ " NPSC ) | IP31 | 200/240V 50/60Hz | 148/143 | 105/94 | 23.1 VA | Green |
| 321 | QD | Conduit ( ½ " NPSC ) | IP31 | 100/120V 50/60Hz | 234/255 | 180/152 | 19.8 VA | Green |
| 322 | QD | Conduit ( ½ " NPSC ) | IP31 | 24V 50/60 Hz | 1338/1096 | 963/716 | 23.1 VA | Green |
| 323 | QD | Conduit ( ½ " NPSC ) | IP31 | 24VDC | 873 | 873 | 20 W | Green |
| 324 | QD | Conduit ( ½ " NPSC ) | IP31 | 12VDC | 1644 | 1644 | 20 W | Green |