FLY AUTOMATION
Automation Industry Expert . Focused on Pneumatic Components 15 years!
Add to Cart
The Parker 491514Q3 D400Q3 solenoid coil is used to parker series solenoid valves, which insert diameter 9.5mm.
Specifications:
• Heat resistant bobbin moulded with 30% glass filled thermoplastic polyester material
• Class H wire 200°C according to IEC 317-13
• Built-in magnetic yoke made by low carbon iron
• Encapsulation with high quality specially designed glass filled nylon ( thermoset material on demand for 22 mm coil ).
The use of other materials is possible upon special agreements. All coils are rated to class F and to IP 65 ( with connector ).
The coil is designed and constructed in accordance to EN 60204.1 and VDE 0580 and it is suitable for industrial ambient conditions. For use in special ambients with high humidity, we suggest the sealed or thermoset version.
| Characteristics | DC | AC (50 Hz) | AC (60 Hz) | |
| Rated power DC | W | 5.5 | ||
| Inrush power AC | VA | 10 | 8.5 | |
| Rated power AC | VA | 6.5 | 5.5 | |
| Coil temperature rise | °C | 60 | 65 | 57 |
| Copper temperature rise | °C | 76 | 80 | 67 |
Note:
| Voltage tolerance: | ± 10% |
| Temperature range: | –10°C ÷ +50°C |
| Duty cycle: | 100% |
Quality Standards :
it is of high quality and has Long service life . The item has passed the strict aging test before ex-factory . No second hand and refurbished products , or leave a compensable ten and return the full amount , but the
buyer due to our purchase of model error is not responsible for returns .
Warranty :
The company supplies the free maintenance if any quality problem within 6 months since the date of the ex-factory , except the following conditions: strong corrosive gases , conductive dust , violent vibration or shock