FLY AUTOMATION
Automation Industry Expert . Focused on Pneumatic Components 15 years!
Add to Cart
Features
1. Specially designed for reverse jet-type dust collector systems
2. High flow Cv(s) to 140 for effective bag cleaning
3. High cycle life
4. Fast opening/closing
5. Port size: DN76
6. Voltage:DC24V AC220V
Model: NO DMF-Z-76S
Working-pressure: 0.35--0.85MPa
Ambient Temperature: -5 ~55
Relative Humidity: < 85 %
Working Medium: Clean Air
Voltage: AC220V DC24V
Diaphragm Life: Over One Million cycles
Connection Port: G3"
Specification
| Fluids | Filtered |
| Diaphragm | NBR: -20~120 ℃ |
| fluororubber: -30~180 ℃ | |
| Nitrile: -40~120 ℃ | |
| Pressure range | From 0.5 to 7.5 bar |
| Cover | Die-cast aluminium |
| Body | Die-cast aluminium |
| Pilot Base | Brass (Chromed) |
| Pilot | Stainless Steel |
| Diaphragm | NBR |
| Bolts and screws | Stainless Steel |
| Diaphragm Backing disk | Stainless Steel |
| Diaphragm spring | Stainless Steel |
Structure
| DMF-Z-76S | |
| Center hole distance | Φ202 |
| Kv/Cv | 159.95/186.66 |
| Blowing area(m²) | 37~65 |
| Air inlet/Outlet size | G3" G3" |
| Weight(kg) | 4.3 |
Packing details
Drawings
Delivery
1. If the products we have in store, we will send it out ASAP after payment.
2. If the products which were customized, we will complete the production within a specified period of time, and send it out the first time, we can promise it.
3. Also we can send by your delivery acount if you want.
4. We have a variety of ways to send goods, usually DHL, Fedex, TNL will be normal ways. If you require use of a courier, we can do it.
Competitive Advantage
| Our product features | Our Services Guarantee: |
| 1) Competitive price | 1) Prompt respond (Reply with 24 hours) |
| 2) Good quality | 2) Free Samples (Customer pay for the delivery cost) |
| 3) Professional Packaging | 3) Registration support. |
| 4) Produce according to Customers’ instruction | 4) Photos/videos are available during production. |
| 5) None delay shipment | 5) Loading inspection, and send loading photos before shipment. |
The installment introduction:
1. First, Confirm the pulse valve in good condition and then installed
2. Pulse valve will be installed directly the outer wall of flange of gas manifold. The spray pipe across the gas manifold. According to the drawing and manual, the pulse valve matching appropriate spray pipe and installation. To avoid the valve install in the air manifold bottom. If the pulse valve matched trachea and connector, the connector will be used for sealing purpose only. It can not as structural support components. It can not rely on the straight connector fixed spray torch and package. The spray pipe and air manifold must be fixed independent.
3. To tighten the hard nut, the maximum torque of 20 N*m.Tighten the trachea, torsion of 20 N*m.
4. The connection control wire needs connect of every electric control valve seat. Pay attention to the line adown to prevent rain waterproof. Or through the joint and nylon pipe, it will connect the pulse valve and electromagnetic assembly boxes of nylon pipe connection.
5. To ensure that provide compressed air clean and dry. The air manifold system provides moderate pressure and check for leaks installation. ( it can brush on soap and water, check whether the interface is bubble). Pressure was carried out on the air bag inflated (pressure of the valve is around 0.03 ~ 0. 86 mpa), recommend for air pressure 0.8 mpa maximum
6. Testing the pulse valve blowing, listening all the pilot valve whether it is normal operation and whether the pulse blowing sound is clear.
Enough Stock: