FLY AUTOMATION
Automation Industry Expert . Focused on Pneumatic Components 15 years!
Add to Cart
Techno XQ Series stainless steel XQ230640 G1/4 5~ 50℃ 3/2 way solenoid valve
Precautions
1. Before installing valves, please check whether there are damages caused by the transportation.
2. Pay attention to air flow direction. When install the mechanical valve, avoid overlong travel, avoid overlong travel of the actuator.
3. Make sure that the voltage is suitable for the solenoid valve. When calibrate the equipment make use of the manual operator of the valve first then turn on the power.
4. It is recommended to install silencers or throttling silencers at the exhaust ports of direction control valves and to pay attention to dust proof and lubrication.
5. When metal pipes are used make sure that there are no metal scraps, dust and oil contamination inside them.
Ordering
1. Please give the description, model and number required clearly.
2. When order solenoid valves, please give their voltages.
3. Generally 2-pos. 3-port valves are normally closed. If normally open valves are required, please point out in the order.
4. Non standard special requirements are made to order, please contact us in advance.
Specification
| Model | Type | Port size | Nominal dia. mm | Operating pressure | Switching time | Operating voltage | Power consumption | Ambient temperature | Service life |
| XQ230440 | 3/2 | G1/8 | 4 | 0.2-1.0MPa | 10ms | DC: 12V 24V AC: 24V/50Hz 110V/50Hz 220V/50Hz Allowable voltage variation ±10% | G1/8 3/8 valve DC: 3W AC: Inrush 7VA Holding 4.2VA G1/2 Valve DC:12W AC: Inrush 23VA Holding 15VA Working mode 100%ED DIN4005 IP65 (IEC144) | 5~ 50℃ | 10 million times |
| XQ230640 | G1/4 | 6 | |||||||
| XQ230840 | G1/4 | 8 | 0.15-1.0MPa | 15ms | |||||
| XQ231040 | G3/8 | 10 | |||||||
| XQ231540 | G1/2 | 12 | |||||||
| XQ240440 | 4/2 | G1/8 | 4 | 0.1-1.0MPa | 15ms | ||||
| XQ250440 | 5/2 | G1/8 | 4 | 0.2-1.0MPa | 10ms | ||||
| XQ250640 | G1/4 | 6 | |||||||
| XQ250840 | G1/4 | 8 | 0.15-1.0MPa | 15ms | |||||
| XQ251040 | G3/8 | 10 | |||||||
| XQ251540 | G1/2 | 12 | |||||||
| XQ230441 | 3/2 | G1/8 | 4 | 0.2-1.0MPa | 10ms | ||||
| XQ230641 | G1/4 | 6 | |||||||
| XQ230841 | G1/4 | 8 | 0.15-1.0MPa | 15ms | |||||
| XQ231041 | G3/8 | 10 | |||||||
| XQ231541 | G1/2 | 12 | |||||||
| XQ250441 | 5/2 | G1/8 | 4 | 0.2-1.0MPa | 10ms | ||||
| XQ250641 | G1/4 | 6 | |||||||
| XQ250841 | G1/4 | 8 | 0.15-1.0MPa | 15ms | |||||
| XQ251041 | G3/8 | 10 | |||||||
| XQ251541 | G1/2 | 12 | |||||||
| XQ350441.0 | 5/3 (Closed center) | G1/8 | 4 | 0.25-1.0MPa | 10ms | ||||
| XQ350641.0 | G1/4 | 6 | |||||||
| XQ350441.1 | 5/3 (Exhaust center) | G1/8 | 4 | ||||||
| XQ350641.1 | G1/4 | 6 | |||||||
| XQ350441.2 | 5/3 (Pressure center) | G1/8 | 4 | ||||||
| XQ350641.2 | G1/4 | 6 |
Pictures details
FAQ
1. When your company establish?
Ningbo Fly Automation Co.,Ltd Was established in 2010, we have been working in agrochemical field for about 26 years, we have a professional production of process, committed to providing customers with the most satisfactory service.
2. Are you a trader or manufacturer? Do you have factory?
We are a solenoid valve manufacturer, we have the ability of mass production . we have our own developing and designing team, which ensure our own technological and specific products for customers.
3. Where’s your factory located? Can we visit your factory?
Our company is in Xikou town,Fenghua city,Zhejiang Province, China,Which is near by Ningbo city,
Customers will be always welcomed to visit our company and our factories.Please contact us your schedule,we will arrange to pick up you and visit our factory.
4. How do you make the quality guarantee?
We have our own quality control center, we have advanced equipments for the inspections. We can guarantee every product will be tested after production.
5. Can you support the specific productions?
We can design and develop the products of customer's requirement, if you have the specific products, please send us a sample, we will develop it for you.