FLY AUTOMATION
Automation Industry Expert . Focused on Pneumatic Components 15 years!
Add to Cart
SMC CDJP2 Series silver Metal CDJP2B16-25D CDJP2B10-20D Double acting needle cylinder
Caution
1.To remove and install the snap ring for the knuckle pin or the clevis pin, use an appropriate pair of pliers (tool for installinga C type hole snap ring). ln particular, usea pair of ultra-mini pliers, such as theSuper Tool CSM-07A, for removing andinstaling the snap rings on the 6mm cylinder.
2.To replace seals or to grease the cylinder during maintenance, use an appropriatepair of pliers (tool for installing a C typehole snap ring). After re-installing the cylinder, make sure that the snap ring isplaced securely in the groove beforesupplying air.
Specifications
| Max. operating pressure | 0.7MPa | |
| Min. operating | Ф4 | 0.15MPa |
| Ф6 | 0.12MPa | |
| Ф10, Ф16 | 0.06MPa | |
| Proof pressure | 1 MPa | |
| Ambient and fluid temperature | -10℃ ~ 70℃, Non-magnetic switch -10℃ ~60℃,automatic shift | |
| Lubrication | Not required | |
| Stroke tolerance | ±1.0 0 | |
| Rod end thread | With thread/Without thread | |
| Operating piston speed | 10 ~ 500mm/s | |
| Cushion | Rubber bumper at both ends | |
| Mounting | Basic, Flange, Foot, Clevis, Trunnion | |
Basic
| Bore size(mm) | Stroke(mm) |
| Ф4 | 5,10,15,20 |
| Ф6 | 5,10,15,20,25 |
| Ф10 | 5,10,15,20,25,30,35,40 |
| Ф16 | 5,10,15,20,25,30,35,40 |
Products shopping guide
For example: you want to purchase a batch of cylinders but you don't know which type you are really want, so you can tell me all your requirement and I'll recommend to you.
Delivery
1. If the products we have in store, we will send it out ASAP after payment.
2. If the products which were customized, we will complete the production within a specified period of time, and send it out the first time, we can promise it.
3. We have a variety of ways to deliver goods, usually DHL, Fedex, TNL will be normal ways, If you require use of a courier, we can do it.
4. Also we can send by your delivery acount if you want.