FLY AUTOMATION
Automation Industry Expert . Focused on Pneumatic Components 15 years!
Add to Cart
Magnetically coupled rodless CY1S Series Aluminum alloy CDY1S25H-150 CDY1S40H-200 cylinder
Warning
1. Be aware of the space between the plates and the slide block.Take sufficient care to avoid getting your hands or fingerscaught when the cylinder is operated.
2. Do not apply a load to a cylinder which is greater than the allowable value stated in the ModelSelection pages.
Mounting And Caution
1. Avoid operation with the external slider fixed to the mounting surface.The cylinder should be operated with the plates fixed to themounting surface.
2. Perform mounting so that the external slider will operate through the entire stroke at the minimum operating pressure.If the mounting surface is not flat, the guides will be warped,increasing the minimum operating pressure and causingpremature wear of the bearings. Therefore, mounting shouldbe performed so that the extemal slider will operate throughthe entire stroke at the minimum operating pressure. Amounting surface with a high degree of flatness is desirable,but in cases where this is not possible, adjust with shims, etc.
Typical Applications
Printing (Tension Control)
Semiconductor (spot welding machine, chip grinding)
Automation Control
Robot
Model
| Type | Bearing type | Model | Bore size (mm) | Auto switch model | Adjustment type |
| Slider type | Slide bearing | CY1S | 6, 10, 15, 20, 25, 32, 40 | D-A7/A8 D-F7/J7 | With adjusting boltWith shock absorbe |
Specifications
| Fluid | Air | ||||
| Proof pressure | 1.05 MPa | ||||
| Max. operating pressure | 0.7 MPa | ||||
| Min. operating pressure | 0.18 MPa | ||||
| Ambient and fluid temperature | -10℃~60℃ | ||||
| Piston speed | 50 to 400 mm/s | ||||
| Cushion | Rubber bumper on both ends | ||||
| Lubrication | Non-lube | ||||
| Stroke length tolerance | 0 to 250st | ||||
| Mounting orientation | Free | ||||
Standard Stroke
| Bore Size (mm) | Standard strok(mm) | Maximum manufacyurable stroke(mm) |
| 6 | 50,100,150,200 | 300 |
| 10 | 50,100,150,200,250,300 | 500 |
| 15 | 50,100,150,200,250,300,350,400,450,500 | 750 |
| 20 | 50,100,150,200,250,300,350,400,450,500 600,700,800 | 1000 |
| 25 | 1500 | |
| 32 | ||
| 40 | 50,100,150,200,250,300,350,400,450,500 600,700,800,900,1000 | 1500 |
Quality Standards
The company for the products are brand new original products, no second-hand and refurbished products, or leave a compensable ten and return the full amount, but the buyer due to our purchase of model error is not responsible for returns, another of the company's sales of products enjoy one year from the date of shipment quality assurance, according to the original quality standards, during warranty with product problems, need confirmation testing by the manufacturer, the supplier to be solved, the demand side due to storage, use, poor maintenance caused by lower-quality product, and not raise objections.