FLY AUTOMATION
Automation Industry Expert . Focused on Pneumatic Components 15 years!
Add to Cart
Description
1.As kinetic energy of moving object can notbe absorbed, it has been stored temporarily,therefore following the increase of the stroke,counter - acting force is getting strongerand stronger. It reaches an summit when itcomes to the stroke end. It finally andinevitably rebounds and causes themechanical damage.
2.In the early stage of moving object stroke, itinstantly stops the moving object by peakcounter- 'actingforce. Itcauses themechanicalshock. It then slowly slides to the stroke end.
3.Shock absorber can absorb the kineticobject energy as soon as possible. It convertsto heat energy and sends out to the air.Therefore the object shows linear decelerationin the whole stroke. It finally and smoothlyslides and stops.
Hydraulic Shock Absorber Buffering Effect
All moving objects have kinetic energy, which depends on the weight and speed of the moving object.To stop a moving object, a device must be installed that ACTS directly on the object: springs, rubber, air registers, or dampers, all of which are cheap but have the fatal disadvantage of bouncing when struck by an external force.The hydraulic buffer adopts the hydraulic principle. The hydraulic oil is extruded through a specially designed orifice to produce heat, which is transferred and distributed to the air through the metal to realize the conversion of kinetic energy into heat energy
Specification
| Model | Stroke(mm) | Every time Max.absorbing energy E (Nm) | Hour Max. absorbing energy Ec (Nm/hr) | Max.impact speed (m/s) | Working temperature(℃) | Weight/Kg |
| AD1412 | 12 | 20 | 24000 | 3.2 | -10 ~+85 | 0.09 |
| AD1416 | 16 | 22 | 26400 | 3.2 | -10 ~+85 | 0.09 |
| AD2020 | 20 | 39 | 30000 | 3.6 | -10 ~+85 | 0.23 |
| AD2030 | 30 | 40 | 35000 | 3.6 | -10 ~+85 | 0.245 |
| AD2525 | 25 | 85 | 51000 | 3.6 | -10 ~+85 | 0.35 |
| AD2540 | 40 | 100 | 84000 | 3.6 | -10 ~+85 | 0.455 |
| AD3625 | 25 | 150 | 90000 | 3.2 | -10 ~+85 | 0.955 |
| AD3650 | 50 | 300 | 108000 | 3.2 | -10 ~+85 | 1.1 |
Structure
Attention
1.It is strictly prohibited to knock or collide the shaft, which may easily lead to bending of the shaft. The surface of the shaft should not be covered with sewage or dirty oil, and the shaft must operate in a clean environment.Otherwise, it will increase the probability of product leakage and reduce the service life of the product.
2.It is strictly prohibited to spray paint on the pipe teeth and axis, otherwise it will affect the heat dissipation effect and oil leakage.
3.Do not burn: because the product is hydraulic oil, put into the fire will lead to fire or cause accidents.
4.It is strictly prohibited to use in vacuum and high pressure environment, otherwise it will damage the machine
After-sale Service
We can provide a series of after-sale service, such as product introduction, mounting, debugging, technical support and so on.