FLY AUTOMATION
Automation Industry Expert . Focused on Pneumatic Components 15 years!
Add to Cart
Solenoid electric valve SY3220-M5 Pilot valve Printing Industry Solenoid valve
Environmental conditions
1) the maximum and minimum temperature of the environment shall be within the allowable range;
2) waterproof solenoid valve shall be selected in the environment with high relative humidity and dripping rain;
3) special products, such as marine solenoid valve, shall be selected for the environment with frequent vibration, bump and impact.
4) for use in corrosive or explosive environment, the corrosion-resistant type shall be selected preferentially according to the safety requirements;
5) if the environmental space is limited, multi-functional solenoid valve shall be selected, because bypass and three manual valves are omitted and online maintenance is convenient.
Principle
There are closed chambers in the solenoid valve. There are through holes in different positions. Each hole is connected with different oil pipes. The middle of the cavity is a piston. On both sides are two electromagnets. Which side of the magnet coil is energized? Side, by controlling the movement of the valve body to open or close different oil drain holes, and the oil inlet hole is normally open, the hydraulic oil will enter different oil drain pipes, and then the pressure of the oil pushes the piston of the oil cylinder, and the piston Drive the piston rod, and the piston rod drives the mechanical device. This controls the mechanical movement by controlling the current through and off of the electromagnet.
Function
1.External leakage is blocked, internal leakage is easy to control, and safety is safe to use.
2.Fast action, low power and light weight.
3.The solenoid valve has a closed cavity, and there are through holes at different positions, each hole is connected with a different oil pipe, the piston is in the middle of the cavity, and two electromagnets are on both sides.
4. High efficiency, high quality products.
Feature
| Series | SY3000 | SY5000 | SY7000 | SY9000 | |
| Fluid | Air | ||||
| Internal lead type Use pressure range | 2 position single | 0.15 ~ 0.7 | |||
| 2 position double | 0.1 ~ 0.7 | ||||
| 3 position | 0.2 ~ 0.7 | ||||
| Ambient and fluid temperature (°C) | –10 ~50 ( No freezing ) | ||||
| Max. operating frequency (Hz) | 2 position single, double | 10 | 5 | 5 | 5 |
| 3 position | 3 | 3 | 3 | 3 | |
| Manual override (Manual operation) | Push-turn locking lever type | ||||
| Pilot exhaust method | Common exhaust type for main and pilot valve | ||||
| Lubrication | Not required | ||||
| Mounting orientation | Unrestricted | ||||
| Impact/Vibration resistance (m/s 2 ) Note) | 150/30 | ||||
| Enclosure | Dust proof | ||||
Picture
Delivery
1. If the products we have in store, we will send it out ASAP after payment.
2. If the products which were customized, we will complete the production within a specified period of time, and send it out the first time, we can promise it.
3. We have a variety of ways to deliver goods, usually DHL, Fedex, TNL will be normal ways, If you require use of a courier, we can do it.
4. Also we can send by your delivery acount if you want.
After-sale service
We can provide a series of after-sale service, such as product introduction, mounting, debugging, technical support and so on.