FLY AUTOMATION
Automation Industry Expert . Focused on Pneumatic Components 15 years!
Add to Cart
Solenoid valve for individual connection VUVG
This universal valve has been newly designed on the inside and now offers an outstanding combination of high flow rates and a compact design. The entire VUVG range, as an individual valve or a valve terminal, is designed to cater precisely for all your requirements.
Compact universal valve
Connection technology via E-box
High flow rate relative to its size
In-line valves can be used as individual valves or manifold valves
| Feature | Value |
| Valve function | 5/2 double solenoid |
| Type of actuation | Electric |
| Valve size | 10 mm |
| Standard nominal flow rate | 340 l/min ... 380 l/min |
| pneumatic working port | M7 |
| Operating voltage | 24V DC |
| Operating pressure | 0.15 MPa ... 0.8 MPa |
| Operating pressure | 1.5 bar ... 8 bar |
| Design | Piston gate valve |
| Approval | RCM trademark c UL us - Recognized (OL) |
| Degree of protection | IP40 IP65 With plug socket |
| Nominal size | 4 mm |
| Exhaust-air function | With flow control option |
| Sealing principle | Soft |
| Mounting position | optional |
| Manual override | Detenting Non-detenting Covered |
| Type of piloting | Pilot actuated |
| Pilot air supply | Internal |
| Symbol | 992897 |
| lap | Positive overlap |
| Pilot pressure | 0.15 MPa ... 0.8 MPa |
| Pilot pressure | 1.5 bar ... 8 bar |
| Suitability for vacuum | no |
| Switching time reversal | 7 ms |
| Duty cycle | 100% |
| Max. positive test pulse with 0 signal | 700 µs |
| Max. negative test pulse with 1 signal | 900 µs |
| Characteristic coil data | 24 V DC: 1.0 W 24 V DC: low-current phase 0.3 W, high-current phase 1.0 W |
| Permissible voltage fluctuations | +/- 10 % |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Feature | Value |
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Restrictions for environmental and media temperature | -5 ... 50° C Without holding current reduction |
| Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress |
| Media temperature | -5 °C ... 60 °C |
| Ambient temperature | -5 °C ... 60 °C |
| Product weight | 55 g |
| Electrical connection | Via electrical sub-base |
| Type of mounting | Either: On manifold rail With through-hole |
| Pneumatic connection, port 1 | M7 |
| Pneumatic connection, port 2 | M7 |
| Pneumatic connection, port 3 | M7 |
| Pneumatic connection, port 4 | M7 |
| Pneumatic connection, port 5 | M7 |
| Note on materials | RoHS-compliant |
| Material seals | HNBR NBR |
| Material housing | Wrought aluminium alloy |
| 1 | Series | 9 | Pneumatic connection | |
| VUVG | Solenoid valve | F | Flange/sub-base | |
| 2 | Directional control valve type | M3 | M3 | |
| L | In-line valve | M5 | M5 | |
| S | Semi-inline valve | M7 | M7 | |
| B | Sub-base valve | G18 | G1/8 | |
| 3 | Design principle | G14 | G1/4 | |
| Piston spool | Q3 | Push-in connector 3 mm | ||
| K | Piston spool with sealing ring | Q4 | Push-in connector 4 mm | |
| 4 | Size | Q4H | Push-in connector 4 mm, with connecting thread M7 | |
| 10A | Size 10, deviating flow | Q6 | Push-in connector 6 mm | |
| 10 | Size 10 | Q6H | Push-in connector 6 mm, with connecting thread M7 | |
| 14 | Size 14 | Q8 | Push-in connector 8 mm | |
| 18 | Size 18 | Q10 | Push-in connector 10 mm | |
| 5 | Valve function | T18 | Push-in connector 1/8” | |
| T32U | 2x3/2-way valve, normally open | T532 | Push-in connector 5/32” | |
| T32C | 2x3/2-way valve, normally closed | T316 | Push-in connector 3/16” | |
| T32H | 2x3/2-way valve, 1x normally closed, 1x normally open | T316H | Push-in connector for 3/16”, M7 | |
| M52 | 5/2-way valve, single solenoid/monostable | T14 | Push-in connector 1/4” | |
| B52 | 5/2-way valve, double solenoid/bistable | T14H | Push-in connector for 1/4”, M7 | |
| P53U | 5/3-way valve, mid-position pressurised | T38 | Push-in connector 3/8” | |
| P53E | 5/3-way valve, mid-position exhausted| | T516 | Push-in connector 5/16” | |
| P53C | 5/3-way valve, mid-position closed | T516H | Push-in connector 5/16”, M7 | |
| 6 | Reset method for monostable/single solenoid valves | |||
| None | 10 | Exhaust | ||
| A | Pneumatic spring | No fitting | ||
| M | Mechanical spring | QN | With fitting | |
| R | Mixed, pneumatic/mechanical spring | U | Silencer | |
| 7 | Pilot air | 11 | Nominal operating voltage | |
| Internal | None | |||
| Z | External | 4 | 5 V DC | |
| 5 | 12 V DC | |||
| 8 | Manual override | 1 | 24 V DC | |
| None | 1A | 24 V AC/50-60 Hz | ||
| H | Non-detenting | |||
| S | Covered | 12 | Electrical connection | |
| Y | Detenting | None | ||
| T | Non-detenting, detenting with accessories | P3 | Without electrical sub-base | |
| C1 | Connection pattern type C, to EN 175 301 | |||
| H2 | Connection pattern H, horizontal plug | |||
| H3 | Connection pattern H, vertical plug | |||
| S2 | Connection pattern S, horizontal plug | |||
| S3 | Connection pattern S, vertical connector | |||
| L1 | Leads 0.5 m | |||
| L2 | Leads 1 m | |||
| L3 | Leads 2.5 m | |||
| L4 | Leads 5 m | |||
| K6 | Cable 0.5 m | |||
| K7 | Cable 1 m | |||
| K8 | Cable 2.5 m | |||
| K9 | Cable 5 m | |||
| R8 | Individual connector M8, 3-pin | |||
| R1 | Individual connector M8, 4-pin | |||
| R3 | Individual connector M12 | |||
| P1 | Interface for pilot valve (CNOMO small) | |||
| 13 | Circuitry | |||
| None | ||||
| R | Holding current reduction with integrated protective circuit | |||