FLY AUTOMATION
Automation Industry Expert . Focused on Pneumatic Components 15 years!
Add to Cart
| Specifications | |
| Fluid | Air |
| Operating pressure | 0.1 to 0.6 Mpa |
| Ambient and fluid temperature | -10 to 60 ℃ |
| Repeatability | ±0.2mm |
| Max.opreating frequency | 60.c.p.m |
| Lubrication | Not required |
| Auto switch(Option) | Solid state auto switch (3-wire,2-wire) |
| Effective gripping force (N-m) | Opening/Closing angle ( Both sides) | Mass (g) | |
| Opening side | Closing side | ||
| 0.16 | 180º | -3º | 70 |
| 0.54 | 150 | ||
| 1.10 | 320 | ||
| 2.28 | 560 | ||
Component Parts
| No | Description | Materia | Note |
| 1 | Body | Aluminum alloy | Hard anodized |
| 2 | Piston | ø10: Stainless steel ø16 to 25: Aluminum alloy | ø16 to 25: Chromated |
| 3 | Joint | Stainless steel | Heat treatment |
| 4 | Finger | Stainless steel | Heat treatment |
| 5 | Cap | Resin | |
| 6 | Ware ring | Resin | |
| 7 | Shaft | Stainless steel | Nitriding |
| 8 | Bushing A | Sintered alloy steel | |
| 9 | Bushing B | Sintered alloy steel | |
| 10 | End plate | Stainless steel | |
| 11 | Bumper | Urethane rubber | |
| 12 | Cylindrical roller | High carbon chrome bearing steel | |
| 13 | Joint roller | Carbon steel | Nitriding |
| 14 | Rubber magnet | Synthetic rubber | |
| 15 | C-shape snap ring | Carbon steel | arbon steel |
| 16 | Piston bolt | Stainless steel |
After-sale Service
One year quality guarantee Policy
We will check the goods quality before shipment. If there are some unexpected problems happen, we hope to solve the problems with buyer through friendly in the following ways:
1, If it is quality problem, buyer can submit argue within 15days after receiving the goods, buyer must provide photos or video and other evidence to seller for identify.
2, Man-made damaged, buyers take full responsibility.
3, Product quality processing program:
1) The buyer return the products for bad quality reasons for one year (not included those damages coursed by shipping or Man-made damaged ). A 15% restocking fee is assessed for any products returned in "used" condition. And then we will send a new product to buyer and pay for the resend shipping cost.
2) If the goods (total price including shipping is less than 10USD) has quality problems, we will resend a new product in buyer next order; if buyer don't plan to make a new order in the near term, buyer can pay the resend shipping cost and ask to resend a new product. If there is an issue with the products, please contact us– we will solve it as soon as we get your email.
