FLY AUTOMATION
Automation Industry Expert . Focused on Pneumatic Components 15 years!
Add to Cart
| Specifications | ||||||||
| Bore size (mm) | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 |
| Action | Double acting | |||||||
| Rotary angle | 90° ±10° | |||||||
| Rotary direction | Clockwise, Counterclockwise | |||||||
| Rotary stroke (mm) | 7.5 | 9.5 | 15 | 19 | ||||
| Clamp stroke (mm) | 10, 20, 30 | 10, 20, 30, 50 | ||||||
| Theoretical clamp force (N) | 40 | 75 | 100 | 185 | 300 | 525 | 825 | 1400 |
| Fluid | Air | |||||||
| Proof pressure | 1.5 MPa | |||||||
| Operating pressure range | 0.1 to 1 MPa | 0.1 to 0.6 MPa | ||||||
| Ambient and fluid temperature | Without auto switch: –10 to 70°C (No freezing) With auto switch: –10 to 60°C (No freezing) | |||||||
| Lubrication | Non-lube | |||||||
| Piping port size | M5 x 0.8 | Rc1/8, NPT1/8 G1/8 | Rc1/4, NPT1/4 G1/4 | |||||
| Mounting | Through-hole/Both ends tapped common, Head flange | |||||||
| Cushion | Rubber bumper | |||||||
| Stroke length tolerance | +0.6 –0.4 | |||||||
| Piston speed Note 5) | 50 to 200 mm/s | |||||||
| Non-rotating accuracy (Clamp part) | ±1.4° | ±1.2° | ±0.9° | ±0.7° | ||||
| Theoretical Output | |||||||
| Bore size (mm) | Rod size (mm) | Operating direction | Piston area (cm2) | Operating pressure (MPa) | |||
| 0.3 | 0.5 | 0.7 | 1.0 | ||||
| 12 | 6 | R | 0.8 | 24 | 40 | 56 | 80 |
| H | 1.1 | 33 | 55 | 77 | 110 | ||
| 16 | 8 | R | 1.5 | 45 | 75 | 105 | 150 |
| H | 2 | 60 | 100 | 140 | 200 | ||
| 20 | 12 | R | 2 | 60.8 | 100 | 139 | 200 |
| H | 3.1 | 90.2 | 149 | 208 | 298 | ||
| 25 | 12 | R | 3.8 | 112 | 185 | 258 | 370 |
| H | 4.9 | 149 | 245 | 341 | 490 | ||
| 32 | 16 | R | 6 | 182 | 300 | 418 | 600 |
| H | 8 | 243 | 400 | 557 | 800 | ||
| 40 | 16 | R | 10.6 | 319 | 525 | 731 | 1050 |
| H | 12.6 | 380 | 625 | 870 | 1250 | ||
| 50 | 20 | R | 16.5 | 502 | 825 | 1149 | 1648 |
| H | 19.6 | 596 | 980 | 1365 | 1961 | ||
| 63 | 20 | R | 28 | 851 | 1400 | 1950 | 2801 |
| H | 31.2 | 948 | 1560 | 2172 | 3121 | ||
| Mass/Through-hole Mounting | ||||||||
| Clamp stock (mm) | Bore size (mm) | |||||||
| 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | |
| 10 | 70 | 100 | 250 | 280 | 500 | 595 | - | - |
| 20 | 87 | 123 | 290 | 320 | 525 | 640 | 1100 | 1520 |
| 50 | - | - | - | - | - | - | 1350 | 1805 |
Caution
Clanp Arm Mounting
1. Use a clamp arm that is available as an option. To fabricate a clamp arm, make sure that the allowable bending moment and the inertial moment will be within the specified range.If a clamp arm that exceeds the specified value is installed, the internal mechanism in the cylinder could become damaged.
Ensuring Safety
1. If one side of the piston is pressurized by sup- plying air with the clamp arm attached, the tpiston will move vertically while the clamp arm rotates. This operation could be hazardous to personnel, as their hands or feet could get caught by the clamp arm, or could lead to equipment damage. Therefore, it is important to secure as a danger zone a cylindrical area wlth the length of the clamp arm as lts radlus, and the stroke plus 20 mm as its height.
Installation and Adjustment/Clamp Arm Removal and Reinstallation
1. During the removal or reinstallation of the clamp arm, make sure to use a wrench or a vise to secure the clamp arm before remov- ing or tightening the bolt.This is to prevent the bolt tightening torque from being applied to the piston rod, which could damage the cylinder's internal mechanism.
FAQ:
Q: Where is your factory ? Can we visit your factory?
A:Our factory is located in Ningbo City, Zhejiang Province,China, 17kms away from Ningbo Airport. We sincerely welcome customers to visit our company and factory.
Q: Could you add our logo on your products?
A: Yes,if your quantity more than 50pcs. we could add your logo on the products.
Q: How long is your delivery time?
A: Generally it is 1-2 days if the goods are in stock. or it will be 3-5 weeks if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ?
A: Yes, we could offer the sample for free charge, but do not pay the cost of express freight.
Q: What is your payment term and payment way?
A: Payment<=2000USD, 100% in advance.
Payment>=2000USD, 30% T/T in advance ,balance before shippment. Payment ways are : T/T, Western Union, Paypal, Alipay.
Q.What’s the shipping way?
A: For small packages, we will choose the door to door express, we cooperated with UPS,DHL,FEDEX,TNT more than 10 years,we gurantee the shipping cost that we offer to you will be the most favorable price among so many suppliers in China. We will send you the tracking number once we got it.
.
For big orders, By Air or By Sea through your shipping forwarder is acceptable, if you don't have forwarder in China, we will find the most cost-effective one for you.