Input current | |
from backplane bus 5 V DC, max. | 130 mA |
Power loss | |
Power loss, typ. | 0.6 W |
Analog inputs | |
Number of analog inputs | 8 |
permissible input voltage for voltage input (destructionlimit), max. | 50 V; Permanent |
permissible input current for current input (destructionlimit), max. | 32 mA |
Analog value generation for the inputs | |
Integration and conversion time/resolution per channel | |
● Resolution with overrange (bit including sign), max. | 16 bit; Unipolar: 15/15/15/15 bit; bipolar: 15 bit + sign/15 bit + sign/15 bit + sign/15 bit + sign |
● Integration time, parameterizable | Yes; 10/ 16.67/ 20/ 100 ms |
● Interference voltage suppression for interference frequency f1 in Hz | 400 / 60 / 50 / 10 Hz |
Encoder | |
Connection of signal encoders | |
● for voltage measurement | Yes |
● for current measurement as 2-wire transducer | Yes; with external transmitter; possible with separate supply for transmitter |
● for current measurement as 4-wire transducer | Yes |
Errors/accuracies | |
Operational error limit in overall temperature range | |
● Voltage, relative to input range, (+/-) | 0.1 %; At Ucm = 0 V or ±0.7 % at Ucm = 50 V |
● Current, relative to input range, (+/-) | 0.3 %; At Ucm = 0 V or ±0.9 % at Ucm = 50 V |
Basic error limit (operational limit at 25 °C) | |
● Voltage, relative to input range, (+/-) | 0.05% |
● Current, relative to input range, (+/-) | 0.05% |
Interrupts/diagnostics/status information | |
Diagnostics function | Yes; Parameterizable |
Alarms | |
● Diagnostic alarm | Yes; Parameterizable |
● Limit value alarm | Yes; Parameterizable, channels 0 and 2 |
Diagnoses | |
● Diagnostic information readable | Yes |
Diagnostics indication LED | |
● Group error SF (red) | Yes |
Isolation | |
Isolation tested with | 500 V DC |
connection method / header | |
required front connector | 40-pin |
Dimensions | |
Width | 40 mm |
Height | 125 mm |
Depth | 117 mm |
Weights | |
Weight, approx. | 272 g |