In standard versions the piloting pressure of the poppet 1 of the main stage 2 is regulated by means of a grub screw protected by cap 3 in the cover 4 .

Optional versions with setting adjustment by handwheel 5 instead of the grub screw are available on request.

Clockwise rotation increases the pressure.

SAGAM can be equipped with a SDHE pilot

solenoid valve 6 for venting

Mounting surface: ISO 6264 size 10, 20 and 32

Max flow: 200, 400 and 600 l/min

Max pressure up to 350 bar

Setting Pressure: 50; 100; 210; 350 Bar

Pressure range [bar]: 4+50; 6+ 100; 7+210; 8+ 350

Protection degree to DIN EN 60529: IP65

Relative duty factor: 100%

Supply voltage tolerance: 土10%

HYDRAULIC CHARACTERISTICS:

Valve model	SAGAM-10	SAGAM-20	SAGAM-32
Setting [bar]	50; 100; 210; 350
Pressure range [bar]	4+50; 6+ 100; 7+210; 8+ 350
Max pressure [bar]	ports P,X= 350 Ports T, Y = 210 (without pilot solenoid valve) For version with pilot solenoid valve, see technical tables SHE015
Max flow [/min]	200	400	600

MAIN CHARACTERISTICS, SEALS AND FLUIDS - for other fluids not included in below table, consult our technical office:

Assembly position	Any position
Subplate suface finishing	Roughness index Ra 0,4 - flatness ratio 0,01/100(ISO 1101)
Ambient temperature	Standard execution = -30C+ +70°C /PE option = -20°C+ +70°C /BT option = -40°C+ +70°C
Seals, recommended fluid temperature	NBR seals (standard)= -20°C+ +80°C, with HFC hydraulic fluids = -20°C +50°C FKM seals (/PE option)=-20°C+ +80°C HNBR seals (/BT option)= -40°C+ +60°C, with HFC hydraulic fluids= -40°C+ +50°C
Recommended viscosity	15+100 mm2/s - max allowed range 2,8 + 500 mm/s
Max fluid contamination level	ISO4406 class 20/18/15 NAS1638 class 9, see also filter section at www .atos.com or KTF catalog
Hydraulic fluid	Suitable seals type	Classification	Ref. Standard
Mineral oils	NBR, FKM, HNBR	HL, HLP, HLPD, HVLP, HVLPD	DIN 51524
Flame resistant without water	FKM	HFDU, HFDR	ISO 12922
Flame resistant with water	NBR, HNBR	HFC	ISO 12922

Coils characteristics (for SAGAM with solenoid venting valve):

Insulation class	Due to the occuring surface temperatures of the H (180°C) for DC coils F (155°C) for AC coils solenoid coils, the European standards ENISO 13732-1 and EN ISO 4413 must be taken into account
Protection degree to DIN EN 60529	IP 65 (with connectors 666,667, 669 correctly assembled)
Relative duty factor	100%
Supply voltage and frequency	See electric feature
Supply voltage tolerance	土10%
Certification	cURus North American standard

ELECTRIC FEATURES FOR SAGAM WITH SOLENOID VALVE:

Inquiry Cart 0